Home
   
  RT2200 Amplifier

RT2200 RMS Power measured at 12.5 Volts DC:
50 Watts x 2 into a 4 Ohm load with less than .5% THD
100 Watts x 2 into a 2 Ohm load with less than 1% THD
200 Watts bridged into a 4 Ohm load with less than 1% THD

Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC:
85 Watts x 2 into a 4 Ohm load
140 Watts x 2 into a 2 Ohm load
280 Watts bridged into a 4 Ohm load

Signal to Noise Ratio:
100dB A-Weighted (Referenced to Rated PWR at 1VRMS Input Sensitivity)

Damping Factor: >200

Frequency Response: 20-20,000 Hz ±.25dB

Bass Boost: Variable Boost centered at 40Hz (0 to 18dB)
Defeatable 18 dB/octave crossover at 85 Hz, selectable for high pass, low pass, or full range.

Dimensions:
7" x 9" x 2" (17.8cm x 22.8cm x 5cm) (not including mounting feet)
8-1/4" x 9" x 2" (20.9cm x 22.8cm x 5cm) (including mounting feet)




MTX HOME · NEWS · SUPPORT · WHERE TO BUY · ISO 9001 CERTIFIED · CONTACT