|
Amplified
- Wire Kit used with MTX Amplified ThunderForms
- 3' Black 10 Gauge cable
- 3' Blue 18 Gauge Remote Wire
- Large 10 Gauge Ring Terminal w/ Yellow Insulator
- Small 10 Gauge Ring Terminal w/ Yellow Insulator
- 10 Gauge Butt Connector w/ Yellow Insulator
- Large roll surround
- Tuned for high output
- Durable 5/8" MDF construction
- Aviation grade carpet
- Heavy duty wiring terminals
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Subwoofers: Two 10" Terminator
- Integrated BTL amplifier connects easily to factory or aftermarket radios.
- Install hardware supplied.
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Install hardware supplied.
- Loaded with two T4500 10" subwoofer
- EBC and wire harness included
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- EBC and wire harness included.
- Two 10" Thunder4500
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Loaded With Dual T4500 10" Subwoofers
- EBC and Wiring Harness Included
- Does Not Fit Mega Cab
- Available In: DarkGray, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with dual Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- Location: Behind seat. No loss of leg room
- Install hardware and grille supplied.
- EBC and wire harness included
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind front seat. Jack and tools relocate to center of enclosure in molded cut-out and are easily accessible.
- Install hardware supplied
- Loaded with dual T4500 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness
- Available In: DarkGray, Gray Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Behind rear seat. Seat still fl ips and folds.
- Loaded with dual Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplifi ed models.
- Install hardware supplied
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Loaded with two Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplifi ed models.
- Install hardware supplied
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- EBC and wire harness included
- Available In: Black, DarkGray, Tan Colors
- Rotationally Molded Design
- Color is Consistent Throughout Even if Scratched
- Location: Under rear bench seat. Jack stays in factory location and tools relocate to under center of enclosure
- Install hardware supplied
- Loaded with Dual T4500 10" Subwoofers
- Built in BTL Amplifier for Easy Connection to Existing System
- EBC and wire harness included.
- 5/8" MDF Construction
- Sealed Design for Tighter Bass Response
- Available In: Black, DarkGray, Tan Colors
- Location: Behind front seat. Jack stays in factory location and is still accessible
- Molded in factory colors.
- EBC and wire harness included
- Two 12" Thunder4500
- Amplifier Power Output: 120 Watts RMS
- 8" High performance subwoofer in a carpeted, vented enclosure
- High Level and RCA inputs for easy connection in any system set up.
- External Bass Control is included for convenient control of volume from front of vehicle.
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on driver's side.
- Install hardware supplied.
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system
- EBC and wire harness included
|
