|
Amplified
- 5/8" MDF Construction
- Ported Design for Increased Low Frequency Output
- Rotationally Molded Design
- Replaces rear passenger side factory net pocket
- Loaded With Single T4500 10" Subwoofers
- BTL Amplifier for easy connection to existing source
- Install Hardware Included
- EBC and wire harness included
- Rotationally Molded Design
- Installs under the driver side rear window in the cargo area beind the factory panel.
- Loaded With Single T4500 10" Subwoofers
- BTL Amplifier for easy connection to existing source
- Install Hardware Included
- EBC and wire harness included
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- EBC and wire harness included.
- Loaded With Single T4500 10" Subwoofers
- BTL Amplifier for easy connection to existing source
- Available In: DarkGray, Tan Colors
- Location: Fits in front of cup holder, under rear seat. Factory jack kit is not disturbed. Seat still folds up and down. Cup holders are still functional.
- Molded in factory colors.
- Loaded With Single T4500 10" Subwoofers
- BTL Amplifier for easy connection to existing source
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- EBC and wire harness included.
- BTL Amplifier for easy connection to existing source
- Molded in factory colors.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- Location: Behind seat of regular cab pickups. No loss of leg room.
- Install hardware supplied.
- EBC and wire harness included.
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Install hardware supplied.
- Loaded with two T4500 10" subwoofer
- EBC and wire harness included
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- EBC and wire harness included
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- One 10" Thunder4500
- EBC and wire harness included
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Install hardware and grille supplied.
- Color is consistent throughout even if scratched
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part.
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included.
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- EBC and wire harness included.
- Two 10" Thunder4500
- Rotationally molded construction
- Consistent color throughout even if scratched
- Includes BTL amplifier and single 10" T4500 subwoofer.
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Fits 2 or 4 door versions
- Install hardware supplied
- EBC and wire harness included.
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- Location: Replaces rear passenger side factory net pocket.
- Install hardware and grille supplied
- EBC and wire harness included
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched.
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- Location: Mounts under rear passenger side seat firing down.
- Install hardware supplied
- EBC and wire harness included
- Available In: Black, DarkGray, Tan Colors
- Location: Behind front seat. Jack stays in factory location and is still accessible
- Molded in factory colors.
- EBC and wire harness included
- Two 12" Thunder4500
|
