|
Amplified
- Location: Under rear seat, no loss of leg room.
- Install hardware supplied.
- One 10" Terminator Subwoofer
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side
- Install hardware and grille supplied
- Loaded with single Terminator 12" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness
- Available In: DarkGray, Tan Colors
- Rotationally molded design, corners are the strongest part.
- Color is consistent throughout even if scratched
- Loaded with single Terminator 12" subwoofer
- Built in BTL amplifier for easy connection to existing system
- Location: Driver's side of cargo area behind rear seat. Spare is still accessible.
- Install hardware and grille supplied
- EBC and wire harness included.
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Built in BTL amplifier for easy connection to existing system.
- Location: Behind rear seat in driver side of hatch.
- Install hardware and grille supplied.
- EBC and wire harness included.
- Loaded with single Terminator 12" subwoofer
- Available In: DarkGray, Gray Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Behind rear seat. Seat still fl ips and folds.
- Loaded with dual Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplifi ed models.
- Install hardware supplied
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Loaded with two Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplifi ed models.
- Install hardware supplied
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Does not interfere with spare tire access
- Does not work with convertible models
- Install hardware supplied
- Loaded with single T4500 10" subwoofer.
- EBC and wire harness included.
- Built in BTL amplifier for easy connection to existing system.
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind passenger seat in regular cab trucks with 60/40 bench seat and standard bench or buckets (jack may need to be relocated). No loss of leg room
- Install hardware supplied
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Location: Behind seat on driver's side. No loss of leg room. Factory jack arm must be relocated (all hardware included).
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Loaded with single T4500 10" subwoofer
- Install hardware supplied
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplified models.
- Amplifier Power Output: 120 Watts RMS
- 8" High performance subwoofer in a carpeted, vented enclosure
- High Level and RCA inputs for easy connection in any system set up.
- External Bass Control is included for convenient control of volume from front of vehicle.
- Wire Kit used with MTX Amplified ThunderForms
- 3' Black 10 Gauge cable
- 3' Blue 18 Gauge Remote Wire
- Large 10 Gauge Ring Terminal w/ Yellow Insulator
- Small 10 Gauge Ring Terminal w/ Yellow Insulator
- 10 Gauge Butt Connector w/ Yellow Insulator
- Location: In trunk on passenger side. Trunk light is still functional
- Install hardware supplied.
- One 10" Terminator subwoofer.
- EBC and wire harness included.
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Spare tire is still accessible
- Loaded with single T4500 10" subwoofer
- Install hardware is included
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included
- 5/8" MDF Construction
- Sealed Design for Tighter Bass Response
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on driver's side.
- Install hardware supplied.
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system
- EBC and wire harness included
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on passenger side. Does not interfere with access to spare tire
- Install hardware supplied
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included
|
