|
Amplified
- Fiberglass construction.
- Built in BTL amplifier for easy connection fo existing system
- Location: Under rear seat, no loss of leg room.
- Loaded with single Terminator 10" subwoofer
- Fiberglass construction.
- Built in BTL amplifier for easy connection to existing system.
- Location: Under rear passenger seat. No loss of leg room.
- EBC and wire harness included.
- Loaded with single 10" Terminator subwoofer.
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Loaded with two Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplifi ed models.
- Install hardware supplied
- Available In: DarkGray, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with dual Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- Location: Behind seat. No loss of leg room
- Install hardware and grille supplied.
- EBC and wire harness included
- Available In: DarkGray, Gray Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Behind rear seat. Seat still fl ips and folds.
- Loaded with dual Terminator 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included on amplifi ed models.
- Install hardware supplied
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Down-fire under rear jump seats. Factory jack is still accessible.
- Install hardware supplied.
- Loaded with dual Terminator 10" subwoofers
- EBC and wire harness included
- Built in BTL amplifier for easy connection to existing system.
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Subwoofers: Two 10" Terminator
- Integrated BTL amplifier connects easily to factory or aftermarket radios.
- Install hardware supplied.
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Install hardware supplied.
- Loaded with two T4500 10" subwoofer
- EBC and wire harness included
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- EBC and wire harness included.
- Two 10" Thunder4500
- Available In: Black, DarkGray, Tan Colors
- Location: Behind front seat. Jack stays in factory location and is still accessible
- Molded in factory colors.
- EBC and wire harness included
- Two 12" Thunder4500
- Available In: Black, DarkGray, Tan Colors
- Rotationally Molded Design
- Color is Consistent Throughout Even if Scratched
- Location: Under rear bench seat. Jack stays in factory location and tools relocate to under center of enclosure
- Install hardware supplied
- Loaded with Dual T4500 10" Subwoofers
- Built in BTL Amplifier for Easy Connection to Existing System
- EBC and wire harness included.
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind front seat. Jack and tools relocate to center of enclosure in molded cut-out and are easily accessible.
- Install hardware supplied
- Loaded with dual T4500 10" subwoofers
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Loaded With Dual T4500 10" Subwoofers
- EBC and Wiring Harness Included
- Does Not Fit Mega Cab
- Rotationally Molded Design
- Installs under the driver side rear window in the cargo area beind the factory panel.
- Loaded With Single FPR 10" Subwoofers
- BTL Amplifier for easy connection to existing source
- Install Hardware Included
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Location: Fits in front of cup holder, under rear seat. Factory jack kit is not disturbed. Seat still folds up and down. Cup holders are still functional.
- Molded in factory colors.
- Loaded With Single FPR 10" Subwoofer
- BTL Amplifier for easy connection to existing source
|
