|
Amplified
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- EBC and wire harness included.
- Loaded With Single T4500 10" Subwoofers
- BTL Amplifier for easy connection to existing source
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- EBC and wire harness included.
- BTL Amplifier for easy connection to existing source
- Molded in factory colors.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- Location: Behind seat of regular cab pickups. No loss of leg room.
- Install hardware supplied.
- EBC and wire harness included.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- EBC and wire harness included
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- One 10" Thunder4500
- EBC and wire harness included
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- Location: Replaces rear passenger side factory net pocket.
- Install hardware and grille supplied
- EBC and wire harness included
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched.
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- Location: Mounts under rear passenger side seat firing down.
- Install hardware supplied
- EBC and wire harness included
- Available In: Black, DarkGray, Tan Colors
- Location: Behind front seat. Jack stays in factory location and is still accessible
- Molded in factory colors.
- EBC and wire harness included
- Two 12" Thunder4500
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on passenger side. Does not interfere with access to spare tire
- Install hardware supplied
- Loaded with single T4500 10" subwoofer
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind spare tire on driver's side using spare tire stowage gear
- Only fi ts with factory spare tire (does not fi t 1996 – 1998 with factory aluminum rims or aftermarket rims).
- Grille supplied.
- Loaded with single T4500 10" subwoofer
- EBC and wire harness included.
- Built in BTL amplifier for easy connection to existing system
- Location: In trunk on passenger side. Trunk light is still functional
- Install hardware supplied.
- One 10" Terminator subwoofer.
- EBC and wire harness included.
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Spare tire is still accessible
- Loaded with single T4500 10" subwoofer
- Install hardware is included
- Built in BTL amplifier for easy connection to existing system.
- EBC and wire harness included
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Built in BTL amplifier for easy connection to existing system.
- Location: Behind rear seat in driver side of hatch.
- Install hardware and grille supplied.
- EBC and wire harness included.
- Loaded with single Terminator 12" subwoofer
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Subwoofers: Two 10" Terminator
- Integrated BTL amplifier connects easily to factory or aftermarket radios.
- Install hardware supplied.
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Location: Replaces factory console. With built-in cup holders and storage area, perfect for palm size computers and other office tools.
- Molded in factory colors.
- Install hardware supplied.
- EBC and wire harness included
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Loaded with single Terminator 10" subwoofer
- Integrated BTL amplifier connects easily to factory or aftermarket radios.
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- EBC and wire harness included
- Install hardware supplied.
|
