|
Loaded
- Available In: DarkGray, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with dual Terminator 10" subwoofers
- Install hardware and grille supplied.
- Location: Behind seat. No loss of leg room
- Available In: Black, DarkGray, Tan Colors
- Rotationally Molded Design
- Color is Consistent Throughout Even if Scratched
- Location: Under rear bench seat. Jack stays in factory location and tools relocate to under center of enclosure
- Install hardware supplied
- Loaded with Dual T4500 10" Subwoofers
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Subwoofers: Two 10" Thunder4500
- Install hardware supplied.
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Install hardware supplied.
- Loaded with two T4500 10" subwoofer
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- Two 10" Thunder4500
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Loaded With Dual T4500 10" Subwoofers
- Does Not Fit Mega Cab
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind front seat. Jack and tools relocate to center of enclosure in molded cut-out and are easily accessible.
- Install hardware supplied
- Loaded with dual T4500 10" subwoofers
- Made from durable polyurethane resin.
- Rotationally molded design.
- Color is consistent throughout even if scratched.
- Location: Behind rear seat. Seat still fl ips and folds.
- Loaded with dual 10" Terminator subwoofers.
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Loaded with two Terminator 10" subwoofers
- Install hardware supplied
- 5/8" MDF Construction
- Aviation Grade Carpet
- Embroidered Terminator Logo
- Available In: Black, DarkGray, Tan Colors
- Location: Behind front seat. Jack stays in factory location and is still accessible
- Molded in factory colors.
- Two 12" Thunder4500
- Side firing super slot port
- Aviation grade carpet.
- Embroidered RoadThunder logo
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on driver's side.
- Install hardware supplied.
- Loaded with single T4500 10" subwoofer
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on passenger side. Does not interfere with access to spare tire
- Install hardware supplied
- Loaded with single T4500 10" subwoofer
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
|
