|
Loaded
- Side firing super slot port
- 8 gauge, nickel plated terminals for easy connection
- 3/4" MDF construction
- 5/8" MDF Construction
- Aviation Grade Carpet
- Embroidered Terminator Logo
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Loaded With Dual T4500 10" Subwoofers
- Does Not Fit Mega Cab
- Rotationally Molded Design
- Replaces rear passenger side factory net pocket
- Loaded With Single T4500 10" Subwoofers
- Rotationally Molded Design
- Installs under the driver side rear window in the cargo area beind the factory panel.
- Loaded With Single T4500 10" Subwoofers
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- Loaded With Single T4500 10" Subwoofers
- Available In: DarkGray, Tan Colors
- Location: Fits in front of cup holder, under rear seat. Factory jack kit is not disturbed. Seat still folds up and down. Cup holders are still functional.
- Molded in factory colors.
- Loaded With Single T4500 10" Subwoofers
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Subwoofers: Two 10" Thunder4500
- Install hardware supplied.
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Install hardware supplied.
- Loaded with two T4500 10" subwoofer
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- One 10" Thunder4500
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Install hardware and grille supplied.
- Color is consistent throughout even if scratched
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part.
- Loaded with single T4500 10" subwoofer
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- Two 10" Thunder4500
- Rotationally molded construction
- Consistent color throughout even if scratched
- Includes a single 10" T4500 subwoofer.
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Fits 2 or 4 door versions
- Install hardware supplied
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Install hardware and grille supplied
- Location: Replaces rear passenger side factory net pocket.
|
