|
Loaded
- Amplifier Power Output: 135 Watts RMS
- Frequency Response: 27Hz-100Hz
- High Level and RCA inputs for easy connection in any system set up.
- Mounting Brackets:Two attachable mounting brackets allow for multiple mounting possibilities and secure subwoofer placement.
- Location: Under rear seat, no loss of leg room.
- Install hardware supplied.
- One 10" Terminator Subwoofer
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Subwoofers: Two 10" Thunder4500
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Loaded With Dual T4500 10" Subwoofers
- Does Not Fit Mega Cab
- Rotationally Molded Design
- Replaces rear passenger side factory net pocket
- Loaded With Single T4500 10" Subwoofers
- Rotationally Molded Design
- Installs under the driver side rear window in the cargo area beind the factory panel.
- Loaded With Single T4500 10" Subwoofers
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- Loaded With Single T4500 10" Subwoofers
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single Terminator 10" subwoofer
- Install hardware supplied.
- Location: Behind seat of regular cab pickups. No loss of leg room.
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Does not interfere with spare tire access
- Does not work with convertible models
- Install hardware supplied
- Loaded with single T4500 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with dual Terminator 10" subwoofers
- Install hardware and grille supplied.
- Location: Behind seat. No loss of leg room
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Loaded with two Terminator 10" subwoofers
- Install hardware supplied
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- One 10" Thunder4500
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Install hardware and grille supplied.
- Color is consistent throughout even if scratched
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part.
- Loaded with single T4500 10" subwoofer
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- Two 10" Thunder4500
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Install hardware and grille supplied
- Location: Replaces rear passenger side factory net pocket.
|
