|
Loaded
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Does not interfere with spare tire access
- Does not work with convertible models
- Install hardware supplied
- Loaded with single T4500 10" subwoofer.
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind passenger seat in regular cab trucks with 60/40 bench seat and standard bench or buckets (jack may need to be relocated). No loss of leg room
- Install hardware supplied
- Loaded with single Terminator 10" subwoofer
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on passenger side. Does not interfere with access to spare tire
- Install hardware supplied
- Loaded with single T4500 10" subwoofer
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind spare tire on driver's side using spare tire stowage gear
- Only fi ts with factory spare tire (does not fi t 1996 – 1998 with factory aluminum rims or aftermarket rims).
- Grille supplied.
- Loaded with single T4500 10" subwoofer
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind front seat. Jack and tools relocate to center of enclosure in molded cut-out and are easily accessible.
- Install hardware supplied
- Loaded with dual T4500 10" subwoofers
- Available In: Black, DarkGray, Tan Colors
- Location: Behind the rear seat. Jack stays in factory location and tools relocate to under passenger side of enclosure. Must have rear bench seat
- Molded in factory colors
- Install hardware supplied.
- One 10" Thunder4500
- Available In: Black, DarkGray, Tan Colors
- Location: Behind front seat. Jack stays in factory location and is still accessible
- Molded in factory colors.
- Two 12" Thunder4500
- Rotationally molded design
- Color is consistent throughout even if scratched
- Loaded with single T4500 10" subwoofer
- Install hardware and grille supplied
- Location: Replaces rear passenger side factory net pocket.
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched.
- Loaded with single T4500 10" subwoofer
- Install hardware supplied
- Location: Mounts under rear passenger side seat firing down.
- Available In: DarkGray, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- Two 10" Thunder4500
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- One 10" Thunder4500
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Install hardware and grille supplied.
- Color is consistent throughout even if scratched
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part.
- Loaded with single T4500 10" subwoofer
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- Loaded With Single T4500 10" Subwoofers
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
- Rotationally Molded Design
- Replaces rear passenger side factory net pocket
- Loaded With Single T4500 10" Subwoofers
- Rotationally Molded Design
- Installs under the driver side rear window in the cargo area beind the factory panel.
- Loaded With Single T4500 10" Subwoofers
|
