|
Unloaded
- Rotationally molded construction
- Consistent color throughout even if scratched
- Fits a single 10" T4500 subwoofer.
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Fits 2 or 4 door versions
- Install hardware supplied
- Available In: DarkGray, Tan Colors
- Rotationally molded design, corners are the strongest part.
- Color is consistent throughout even if scratched
- Fits single 12" subwoofer.
- Install hardware and grille supplied
- Location: Driver's side of cargo area behind rear seat. Spare is still accessible.
- Works with MTX subwoofers T4512-04, TN12-04, TR4512-04, JH4512-04
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits a single T4500 10" subwoofer
- Install hardware and grille supplied
- Location: Replaces rear passenger side factory net pocket.
- Fits MTX Subwoofer Models T4510-04, TN10-04, TR4510-04, JH4510-04
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits 10" subwoofer.
- Location: Replaces rear passenger side factory net pocket.
- Fits MTX subwoofers T4510, TN10 (w/o Gasket)
- Install hardware and grille supplied
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched.
- Fits single 10" subwoofer.
- Install hardware supplied
- Location: Mounts under rear passenger side seat firing down.
- Available In: Blue, DarkGray, Green, Maroon, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits two 10" subwoofers
- Install hardware and grille supplied.
- Location: Behind seat. No loss of leg room
- Fits MTX subwoofers T4510-04
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind front seat. Jack and tools relocate to center of enclosure in molded cut-out and are easily accessible.
- Install hardware supplied
- Fits two 10" subwoofers
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side
- Install hardware and grille supplied
- Fits single 12" subwoofer
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Does not interfere with spare tire access
- Does not work with convertible models
- Install hardware supplied
- Fits a single T4500 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind driver's seat in regular cab trucks, 60/40 bench seats, sport bucket seat, or bench seat. No loss of leg room. Factory storage tray on driver side must be removed
- Install hardware supplied
- Fits single 10" subwoofer
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Down-fire under rear jump seats. Factory jack is still accessible.
- Install hardware supplied.
- Fits two 10" subwoofers
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on driver's side.
- Install hardware supplied.
- Fits single 10" subwoofer
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on passenger side. Does not interfere with access to spare tire
- Install hardware supplied
- Fits single 10" subwoofer
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind spare tire on driver's side using spare tire stowage gear
- Only fi ts with factory spare tire (does not fi t 1996 – 1998 with factory aluminum rims or aftermarket rims).
- Grille supplied.
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Behind rear seat. Seat still fl ips and folds.
- Fits two 10" subwoofers
- Install hardware supplied
- Fits MTX subwoofers T4510, T5510, TN10, TR4510, JH4510
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Fits two 10" subwoofers
- Install hardware supplied
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
|
