|
Unloaded
- Available In: Charcoal, Tan Colors
- Location: Behind seat on driver's side. No loss of leg room. Factory jack arm must be relocated (all hardware included).
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Fits single 10" subwoofer
- Install hardware supplied
- Location: In trunk on passenger side. Trunk light is still functional
- Install hardware supplied.
- Fits a 10" Thunder4500
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Spare tire is still accessible
- Fits 10" subwoofer
- Install hardware is included
- Dark Gray Aviation Grade Carpeting
- Strong High Density Wood Construction
- Dark Gray Aviation Grade Carpeting
- Strong High Density Wood Construction
- Spring Loaded Speaker Terminal
- Designed for use with MTX TT65 Thunder Thin Subwoofers
- Location: Inside factory center console.
- Black fiberglass construction.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
- 1.75 Cubic Foot Volume per Chamber
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Fits 2 10" Subwoofers
- Does Not Fit Mega Cab
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- Fits single 10" subwoofer.
- Fits MTX subwoofers T4510, T5510, TN10, TR4510, JH4510
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Available In: DarkGray, Tan Colors
- Location: Replaces factory console. With built-in cup holders and storage area, perfect for palm size computers and other office tools.
- Molded in factory colors.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Location: Fits in front of cup holder, under rear seat. Factory jack kit is not disturbed. Seat still folds up and down. Cup holders are still functional.
- Molded in factory colors.
- Fits single 10" subwoofer.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
- Fits MTX subwoofers T4510, TN10 (w/o gasket), TR4510, JH4510
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Fits Two 10" Thunder4500
- Install hardware supplied.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits a single T4500 10" subwoofer
- Install hardware supplied.
- Location: Behind seat of regular cab pickups. No loss of leg room.
- Available In: Blue, DarkGray, Maroon, Red, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits dual 10" subwoofers
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Install hardware supplied.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Fits Two 10" Thunder4500
|
