|
Unloaded
- Available In: DarkGray, Tan Colors
- Location: Replaces factory console. With built-in cup holders and storage area, perfect for palm size computers and other office tools.
- Molded in factory colors.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Location: Fits in front of cup holder, under rear seat. Factory jack kit is not disturbed. Seat still folds up and down. Cup holders are still functional.
- Molded in factory colors.
- Fits single 10" subwoofer.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
- Fits MTX subwoofers T4510, TN10 (w/o gasket), TR4510, JH4510
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Fits Two 10" Thunder4500
- Install hardware supplied.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits a single T4500 10" subwoofer
- Install hardware supplied.
- Location: Behind seat of regular cab pickups. No loss of leg room.
- Available In: Blue, DarkGray, Maroon, Red, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits dual 10" subwoofers
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Install hardware supplied.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Fits Two 10" Thunder4500
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- Fits One 10" Thunder4500
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Install hardware and grille supplied.
- Color is consistent throughout even if scratched
- Fits MTX subwoofers T4510, T5510, TN10, TR4510, JH4510
- Available In: DarkGray, ForestGreen, Maroon, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- Fits two 10" Thunder4500
- Rotationally molded construction
- Consistent color throughout even if scratched
- Fits a single 10" T4500 subwoofer.
- Location: Trunk of vehicle on driver side. Does not interfere with access to spare tire.
- Fits 2 or 4 door versions
- Install hardware supplied
- Available In: DarkGray, Tan Colors
- Rotationally molded design, corners are the strongest part.
- Color is consistent throughout even if scratched
- Fits single 12" subwoofer.
- Install hardware and grille supplied
- Location: Driver's side of cargo area behind rear seat. Spare is still accessible.
- Works with MTX subwoofers T4512-04, TN12-04, TR4512-04, JH4512-04
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits a single T4500 10" subwoofer
- Install hardware and grille supplied
- Location: Replaces rear passenger side factory net pocket.
- Fits MTX Subwoofer Models T4510-04, TN10-04, TR4510-04, JH4510-04
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits 10" subwoofer.
- Location: Replaces rear passenger side factory net pocket.
- Fits MTX subwoofers T4510, TN10 (w/o Gasket)
- Install hardware and grille supplied
- Made from durable polyurethane resin
- Rotationally molded design.
- Color is consistent throughout even if scratched.
- Fits single 10" subwoofer.
- Install hardware supplied
- Location: Mounts under rear passenger side seat firing down.
- Available In: Blue, DarkGray, Green, Maroon, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits two 10" subwoofers
- Install hardware and grille supplied.
- Location: Behind seat. No loss of leg room
- Fits MTX subwoofers T4510-04
|
