|
Unloaded
- 1.75 Cubic Foot Volume per Chamber
- Available In: Black, DarkGray, Tan Colors
- Location: Under rear driver side seat. Seat still folds up and down, jack stays in factory location
- Molded in factory colors.
- Install hardware supplied.
- Fits single 12" subwoofer
- Fits MTX subwoofers T4512-04, TN12-04, TR4512-04, JH4512-04
- Fiberglass Construction
- Fits Single 10" Shallow Subwoofer
- Install Hardware Included
- Fits MTX Subwoofer Models FPR10-02 and FPR10-04
- Fits Behind Rear Seat
- Location: Inside factory center console.
- Black fiberglass construction.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits single 12" subwoofer.
- Location: Behind rear seat in driver side of hatch.
- Install hardware and grille supplied.
- Fits MTX subwoofers T4512, T5512, TN12, TR4512, JH4512, TR5512, JH5512
- Location: Under rear seat, no loss of leg room.
- Install hardware supplied.
- Fits Single 10" Subwoofer
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind passenger seat in regular cab trucks with 60/40 bench seat and standard bench or buckets (jack may need to be relocated). No loss of leg room
- Install hardware supplied
- Fits single 10" subwoofer
Vehicle specific ThunderForm enclosures are designed to utilize space in vehicles that would otherwise go unused to add a subwoofer enclosure. These enclosures are highly durable and provide a custom
- 1/2" Medium Density Fiberboard Construction
- Location: Under rear seat, no loss of leg room.
- Finished in High Durability Textured Paint
- Fits Single 10" Shallow Mount Subwoofer
- DOES NOT FIT CONVERTIBLES
- Location: Rear hatch area on driver side. Completely invisible when installed. Does not interfere with T-Top storage. Rear luggage cover is unaffected.
- Install hardware and grille supplied.
- Fits single 10" subwoofer.
- Fits MTX subwoofers T4510, T5510, TN10, TR4510, JH4510
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Available In: DarkGray, Tan Colors
- Location: Replaces factory console. With built-in cup holders and storage area, perfect for palm size computers and other office tools.
- Molded in factory colors.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack is relocated (hardware included).
- Install hardware supplied.
- Molded in factory colors.
- Fits MTX subwoofers T4510, TN10 (w/o gasket), TR4510, JH4510
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits a single T4500 10" subwoofer
- Install hardware supplied.
- Location: Behind seat of regular cab pickups. No loss of leg room.
- Available In: Blue, DarkGray, Maroon, Red, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits dual 10" subwoofers
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Install hardware supplied.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Fits Two 10" Thunder4500
- Location: Behind rear seat on driver's side. When installed, the seat bottom will not flip up.
- Install hardware supplied.
- Fits One 10" Thunder4500
|
