|
Unloaded
- Location: In trunk on passenger side. Trunk light is still functional
- Install hardware supplied.
- Fits a 10" Thunder4500
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Spare tire is still accessible
- Fits 10" subwoofer
- Install hardware is included
- Location: Inside factory center console.
- Black fiberglass construction.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
- Available In: Black, DarkGray, Tan Colors
- Rotationally Molded Design
- Color is Consistent Throughout Even if Scratched
- Location: Under rear bench seat. Jack stays in factory location and tools relocate to under center of enclosure
- Install hardware supplied
- Fits two 10" subwoofers.
- Works with MTX subwoofer models T4510-04, TN10-04, TR4510-04, JH4510-04
- Fiberglass Construction
- Fits Single 10" Shallow Subwoofer
- Install Hardware Included
- Fits MTX Subwoofer Models FPR10-02 and FPR10-04
- Fits Behind Rear Seat
- Available In: Gray, Tan Colors
- Rotationally Molded Design
- Fits Under Rear Seat With No Loss of Leg Room
- Fits 2 10" Subwoofers
- Does Not Fit Mega Cab
- Available In: DarkGray, Tan Colors
- Location: Behind rear seat, jack stays in factory location.
- Molded in factory colors.
- Fits Two 10" Thunder4500
- Install hardware supplied.
- Available In: Blue, DarkGray, Maroon, Red, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Fits dual 10" subwoofers
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Location: Under rear seat on driver side. Bolts to floor of vehicle. No loss of leg room. Factory jack kit is not disturbed.
- Install hardware supplied.
- Location: Under rear jump seat (replaces factory tool tray). Jack must be relocated into new location molded into ThunderForm.
- Install hardware supplied.
- Fits Two 10" Thunder4500
- Available In: DarkGray, ForestGreen, Maroon, Tan Colors
- Location: Under rear seat. No loss of leg room. Bolts to vehicle with supplied hardware (cut out in rear of ThunderForm allows factory jack arm to remain in current location). Jack is unaffected
- Molded in factory colors.
- Fits two 10" Thunder4500
- Available In: Blue, DarkGray, Green, Maroon, Tan Colors
- Rotationally molded design
- Color is consistent throughout even if scratched
- Fits two 10" subwoofers
- Install hardware and grille supplied.
- Location: Behind seat. No loss of leg room
- Fits MTX subwoofers T4510-04
- Available In: Black, DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind front seat. Jack and tools relocate to center of enclosure in molded cut-out and are easily accessible.
- Install hardware supplied
- Fits two 10" subwoofers
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Down-fire under rear jump seats. Factory jack is still accessible.
- Install hardware supplied.
- Fits two 10" subwoofers
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Behind rear seat. Seat still fl ips and folds.
- Fits two 10" subwoofers
- Install hardware supplied
- Fits MTX subwoofers T4510, T5510, TN10, TR4510, JH4510
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Fits two 10" subwoofers
- Install hardware supplied
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
|
