|
Unloaded
- 3/4" MDF Construction
- Front Slot Port
- Recessed Sides with Black High Gloss Vinyl Baffle
- Designed for MTX 8500 & 9500 Subwoofers
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Does not interfere with spare tire access
- Does not work with convertible models
- Install hardware supplied
- Fits a single T4500 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind driver's seat in regular cab trucks, 60/40 bench seats, sport bucket seat, or bench seat. No loss of leg room. Factory storage tray on driver side must be removed
- Install hardware supplied
- Fits single 10" subwoofer
- Available In: DarkGray, Tan Colors
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Down-fire under rear jump seats. Factory jack is still accessible.
- Install hardware supplied.
- Fits two 10" subwoofers
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on driver's side.
- Install hardware supplied.
- Fits single 10" subwoofer
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Trunk of vehicle on passenger side. Does not interfere with access to spare tire
- Install hardware supplied
- Fits single 10" subwoofer
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: Behind spare tire on driver's side using spare tire stowage gear
- Only fi ts with factory spare tire (does not fi t 1996 – 1998 with factory aluminum rims or aftermarket rims).
- Grille supplied.
- Fits single 10" subwoofer.
- Available In: DarkGray, Tan Colors
- Made from durable polyurethane resin
- Rotationally molded design
- Color is consistent throughout even if scratched
- Location: Behind rear seat. Seat still fl ips and folds.
- Fits two 10" subwoofers
- Install hardware supplied
- Fits MTX subwoofers T4510, T5510, TN10, TR4510, JH4510
- Made from durable polyurethane resin
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Location: Under rear bench seat, down fi ring. Jack stays in factory location.
- Fits two 10" subwoofers
- Install hardware supplied
- Fits MTX subwoofers T4510, TN10, TR4510, JH4510
- Available In: Charcoal, Tan Colors
- Location: Behind seat on driver's side. No loss of leg room. Factory jack arm must be relocated (all hardware included).
- Rotationally molded design, corners are the strongest part
- Color is consistent throughout even if scratched.
- Fits single 10" subwoofer
- Install hardware supplied
- Location: In trunk on passenger side. Trunk light is still functional
- Install hardware supplied.
- Fits a 10" Thunder4500
- Rotationally molded design.
- Color is consistent throughout even if scratched
- Location: In trunk on passenger side. Spare tire is still accessible
- Fits 10" subwoofer
- Install hardware is included
- Dark Gray Aviation Grade Carpeting
- Strong High Density Wood Construction
- Dark Gray Aviation Grade Carpeting
- Strong High Density Wood Construction
- Spring Loaded Speaker Terminal
- Designed for use with MTX TT65 Thunder Thin Subwoofers
- Location: Inside factory center console.
- Black fiberglass construction.
- Install hardware supplied.
- Explanation: Unloaded enclosures are empty enclosures -- subwoofer & amplifier are not included
- Fits single 10" subwoofer.
|
