THUNDER Series THUNDER500.1 500W RMS Mono Block Class D Amplifier

500W RMS 2 Ohm Stable Mono Block Class D Amplifier
SKU: THUNDER500.1
Availability: In stock
Customers rate this product:
(12)
4.9 12
$199.95
$20.00
$179.95
Qty:
Share this product:

THE TRUE MTX ADVANTAGE:
Click here to see how the THUNDER500.1 stacks up against the "other guys"

Feel the Thunder
MTX THUNDER500.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts peak power in an incredibly small package.

High Power High Value
The THUNDER500.1 is a high powered subwoofer amplifier capable of delivering up to 500 watts RMS power at 2Ω. Additionally, the unit is designed to be installed in almost any vehicle due to its small chassis size.

Technologically Advanced
The THUNDER500.1 features a high efficiency class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat. The THUNDER500.1 also features surface mount technology. This design uses smaller more efficient parts that adhere to the circuit board much better than traditional through hole designs making it extremely vibration resistant.

Easy Adjustment
The control panel on the THUNDER500.1 is easy to access and make adjustments. The unit includes a variable low pass filter and a selectable bass boost, 0, +6, or +12dB. The unit also features a subsonic filter that can be used in conjunction with a vented enclosure for optimal sound quality.

Secure Connections
The THUNDER500.1 uses set screw type connections for both its power and speaker terminals. The power and ground inputs will support up to a 4 AWG wire and the speaker inputs can support up to a 12 AWG wire. Set screw type connectors provide the most secure connection minimizing power loss and delivering all the power to the amplifier and to the speakers.

Remember, you cannot install an amplifier without an amplifier kit. MTX recommends using a ZN5K-04 or ZN5K-08 to power the THUNDER500.1.

StreetWires 20% Off

Small Footprint
Extruded Aluminum Heat Sink
Surface Mount PCB Design
Variable Crossover
Description Mono Block
RMS Power Output (Watts) 500
4 Ohm RMS Power Output 300W x 1 Channel
Signal-to-noise Ratio (1Watt) 80dB
2 Ohm RMS Power Output 500W x 1 Channel
1 Ohm RMS Power Output NA
Topology Class D
THD+N (Distortion) (1 Watt) <1%
Frequency Response 10Hz - 220Hz
Crossover Variable Low @ 40Hz to 220Hz 12dB/Oct
Subsonic Filter 10Hz to 50Hz 12dB/Oct Variable
Bass Boost 0 6 12dB Switchable
Max Sensitivity 200mV
Max Input Signal 5V
Height 6.3"
Width 8.94"
Depth 2.25"
Owners Manual MTX004553 THUNDER Series Owners Manual.pdf
50Hz Test Tone 50Hz.mp3
50Hz Frequency Test Tone 50Hzmp3.zip

How to Set Your Amplifier Gain Using Ohm's Law

Join Us!