SKU: MAVERICKBOAKIT3

Can-Am Maverick Bluetooth Overhead Audio Sound Bar with 2-Channel Amplifier, 2 Roll Cage Speakers, and Powered Subwoofer Enclosure System

The MAVERICKBOAKIT3 is a package that includes everything you need to take your Can-Am Maverick to the next level in sound. This kit includes the MUDSYS41 Bluetooth overhead audio system, MUD100.2 compact amplifier, a pair of all weather MUD65P roll cage mount speakers, CANAM-10 amplified subwoofer enclosure, and all the wires you need to connect everything together.

  • Bluetooth Enabled
  • IP66 Rated
  • Integrated Amplifier
    *
    *
    *
    *
    *

    Wire, fuse, fuse holder and fittings required to connect amplifier to electrical system.

    *
    *
    *

    Cable to connect source to amplifier

    1,631.55
    1,569.60
    Share this MTX page...

    Six Speaker + Subwoofer Maverick Sound System

    The MAVERICKBOAKIT3 is a package that includes everything you need to take your Can-Am Maverick to the next level in sound. The MTX MAVERICKBOAKIT3 audio package includes a Bluetooth overhead audio system and amplified subwoofer enclosure that delivers unbeatable, high-quality audio for Can-Am Maverick side-by-sides. This all weather system includes the MUDSYS41* that includes four 6.5" coaxial speakers that work in conjunction with an integrated 280-watt power amplifier. Sources include Bluetooth, 3.5mm auxiliary, and a digital AM/FM radio that allow you to listen to your music however you want. The unit also includes a USB port for charging your device, a digital clock, and LED map light. The MUD100.2 amplifier delivers high power with minimal current draw to the MUD65P all weather cage mount speaker pods allowing for even louder sound and options especially for 4-seater Maverick models so all riders can enjoy music during a ride. Finally the CANAM-10 is an all-weather amplified subwoofer enclosure that mounts out of the way so no space is sacrified but you still get the added bass only a subwoofer can deliver.

    The included 10-gauge amplifer kit includes power, ground, and remote turn on wire as well as a fuse, and fuse holder. Additionally, the package includes interconnects to connect your source to the amplifier. This package is built to withstand anything that mother nature can throw at it and to  ensure you can enjoy your music wherever life takes you.

    The MAVERICKBOAKIT3 system is the perfect solution for select Can-Am Maverick models. CANAM-10 WILL NOT fit Maverick X3 models.

    MUDSYS41 Key Features

    • Includes Four 6.5" All-Weather Coaxial Speakers
    • Source Unit with Integrated 280-Watt Power Amplifier and Digital Clock
    • Inputs - Bluetooth 2.0, 3.5mm Auxiliary, & USB (External Memory Stick)
    • AM/FM Radio with USA and European Frequency Bands
    • RCA Output
    • Integrated Wiring Harness (Power/Ground/Accessory)
    • Storage Cargo Nets and Overhead LED Dome Light
    • Fits Cages with Inside Measurement 49.25" to 56.0"
    • Mounts to Roll Bars with Diameter Between 1.75" and 2"
    • Weather Resistant in Accordance with IP66 Rating

    MUD100.2 Amplifier Key Features

    • Compact Design Enables Installation Anywhere
    • Conformal Coated Printed Circuit Board that Resists Moisture
    • Fixed Crossovers, High and Low Pass Allow Use with Full Range Speakers or Subwoofers
    • 400W Peak Power

    MUD65P Speaker Key Features

    • Fits Bars Between 1 1/2" and 2"
    • Polypropylene Woofer and Soft Dome Tweeter
    • Internal Crossover Network
    • ABS Impact Resistant Grille with UV Inhibitor
    • Tested 500hrs to ASTM B117, D4329 Standard

    CANAM-10 Subwoofer Enclosure Key Features

    • Integrated 250-Watt RMS Amplifier
    • Low Level Input with External Gain Control
    • High Efficiency 10" Polypropylene Subwoofer
    • Mounts Underneath Dashboard (Passenger Side) - Direct Fit

    *Unit may reduce headroom in vehicle once installed, especially for riders wearing helmets.

    SPECIFICATIONS
    Description 2-Channel
    Peak Power (Watts) 200
    4Ω RMS Power Output 50W x 2 Channels
    2Ω RMS Power Output 100W x 2 Channels
    1Ω RMS Power Output NA
    Topology Full Range Class D
    THD <1.0%
    Frequency Response 20Hz - 20kHz
    Crossover Fixed HPF/LPF @ 80Hz, 12dB/Oct
    Max Sensitivity 200mV
    Maximum Input Signal 5V
    Height 4.65"
    Width 5.71"
    Depth 1.61"