MTX 504X 300W RMS 4-Channel Class A/B Amplifier

Car Audio Amplifiers

Car Audio Amp

Raw power for pure music nirvana

300W RMS 2 Ohm Stable 4-Channel Class A/B Full Range Amplifier
Availability: In stock
SKU: 504X
Share this MTX page...

The XThunder 504X is a 4-channel designed to power coaxial or component speakers in any vehicle application. This unit features a full range, class A/B design that allows it to deliver exceptional sound quality.

Key Features:

  • Anodized Aluminum Top Cover
  • Class A/B Topology
  • Set Screw Terminals
  • High and Low Pass Crossover
  • Line and Speaker Level Inputs
  • Durable ABS Endcaps

The XThunder 504X offers high end fit and finish that is designed to bring a great look and great sound to your installation. The unit features an anodized aluminum top cover that not only looks good but efficiently dissipates heat away from critical components ensuring the amplifier plays loud and long when you need it to. Each channel is capable of outputting 50-watts RMS power at 4Ω or 75watts RMS power at 2Ω. Additionally the rear channels can be bridged to drive a 4Ω subwoofer with 150-watts RMS power. 

504X EndcapThe class A/B topology has long been considered the standard for sound quality and the 504X delivers with crystal clear sound, even at high volumes. The unit includes both a high pass and low pass filter so that your speakers play only the frequencies they are supposed to without overworking. The unit can easily connect to factory or aftermarket radios using either the high level or speaker level inputs to get signal from the source to the amplifier.

The unit's terminal blocks use set screw type connectors to ensure maximum signal transfer of both power and output. A set screw connector eliminates the need for a spade or slide connector and offers the best security for maintaining wire integrity within the block. Overall the XThunder 704X delivers great sound and high power at an unbeatable price that offers great value and peace of mind.

  • Anodized Aluminum Top Cover
  • Class A/B Topology
  • Set Screw Terminals
  • High and Low Pass Crossover
  • Line and Speaker Level Inputs
Tech Specs
Description 4 Channel
Total Peak Power 600 Watts
2 Ohm RMS Power Output 75W x 4 Channels
4 Ohm RMS Power Output 50W x 4 Channels
1 Ohm RMS Power Output NA
Bridged RMS Power 150W x 2 Channels
Signal to Noise Ratio >75 dB
Topology Class A/B
THD <1%
Frequency Response 20Hz - 20kHz
Crossover High, 12dB/Oct; 40Hz to 8000Hz Low, 24dB/Oct; 40Hz to 5000Hz
Max Sensitivity 250mV
Maximum Input Signal 4V
Height 9.125"
Width 9.75"
Depth 2.25"
Support Files
504x_704x_InstallSheet (1 page) View |  Download
1kHzmp3 Download
Customers who bought this item also bought

Terminator TNP212D2 Dual 12 inch 400W RMS Sealed Enclosure and Mono Block Amplifier

The Party Pack

The MTX Terminator TNP212D2 is an excellent all-in-one solution for anyone looking to add bass to their vehicle's audio system. The Party Pack is 400 Watts and two heavy twelves of a rocking concert-in-a-box!

Everything you need for a great bass system is in this package except wire! Consider buying the Complete TNP212D2 subwoofer package with all wiring included, or add your choice of amp kit, interconnects and speaker wire to your cart (shown below).

Loaded Enclosure With Strong Amp

This package includes the TNP212D2, a dual 12" sealed subwoofer enclosure and the included TNA251, a single channel amplifier specifically designed to work with the enclosure. For over 40 years MTX Audio has been making car audio electronics designed to deliver more than expected and that is exactly what this package offers.

$299.95 $249.95
Free shipping

MWA034 External Bass Control

MWA034 EBC for TA, TE, TC amps and amplified ThunderForms

External Bass Control for use with TA, TC, and TE Series Amplifiers as well as amplified ThunderForms.

MTX External Bass Controllers

MWA034 For TA, TC, TE, and MXA Series MTX amplifiers
MWA035 For older XThunder Series MTX amplifiers 1000XD, 600XD, 300XD, TH series monoblock amplifiers 1200.1d, 650.1d, 350.1d
MWA037 For RFL and JackHammer Series amplifiers
MWA039 For TD Series amplifiers
MWA040 For THUNDER and WET series amplifiers Thunder1000.1, Thunder500.1, Wet500.1 amps
XTL-EBC For the XTL110P amplified subwoofer enclosure

See more information about External Bass Controllers at External / Remote Bass Controls.


BassSlammer 6901 6 inch x 9 inch Unloaded Rectangular Shape Enclosure Pair

6" x 9" Unloaded Rectangular Enclosure Pair
$39.95 $22.00