CES 2016

PHOENIX, AZ - MTX Audio, of the MiTek Electronics and Communications Group, announced the release of the S65 subwoofer series at the upcoming 2016 CES to be held January 6-9, 2016 in Las Vegas, NV. The S65 Series is designed to deliver unmatched SPL output using a patented surround design.

The S65 Series features a square design utilizing MTX Audio's patented surround geometry (US Patent #7,275,620) that allows for increased Xmax and lower distortion resulting in higher SPL and better sound quality. Additional functional technologies include MTX's Spider Plateau Venting, which mechanically targets cool air at the voice coil, and a t-yoke with integrated heat sink to further assist in removing hot air from the voice coil ensuring reliability and minimized distortion. The S65 is uses a similar motor structure to the popular 55 Series but with a larger magnet, allowing each S65 model to handle up to 500-watts RMS power. The S65 Series is available in both 12" and 10" sizes in dual 4Ω configurations and will be shipping in early March 2016.

"The S65 is an outstanding compliment to our total product lineup," said National Mobile Audio Sales Manager, Dan McLeod. "The patented surround design used on these subs make them unbelievably loud at a price point that is perfect for today's market. Many retailers and end users have been urging us to bring our square subwoofer back, we now have that solution available for them."


Las Vegas, NV, January 4th, 2016 - MTX Audio, of the MiTek Electronics and Communications Group, announced the release of the MUD6SP universal motorsports sound bar at the upcoming 2016 CES to be held January 6-9, 2016 in Las Vegas, NV. The MUD6SP is based off the popular MUD6SPBT and allows for increased flexibility.

The MUD6SP is a six speaker, all-weather sound bar that features four 3" full range speakers and two 1" tweeters. An internal amplifier powers the unit and an integrated wiring harness is included for easy connection to the vehicle's electrical system. The unit includes an innovative mounting system that allows the low profile mounts to be attached on the top, bottom, or back enabling the user to attach it to the best location on their UTV. Audio connections include an auxiliary input and output. The MUD6SP can be used by itself with a direct connection to any device with a 3.5mm output. The unit can also be used in conjunction with a MUD6SPBT using the auxiliary input to connect the two systems together allowing the user to double the number of speakers used and to enable the use of Bluetooth through the MUD6SPBT. The MUD6SP will be shipping in early February 2016 with a MRP of $399.95.

"The release of the MUD6SP further proves our commitment to the motorsports category" said National Sales Manager, Jason Fickas. "Customers in the UTV market want solutions that are easy to install, look good on their machines, and sound great. Additionally, many riders prefer to direct connect their devices rather than stream their music. The MUD6SP meets all of the criteria these customers are looking for at a price that is unbeatable."


The THUNDER Series consists of four models, a 6.5", 6.5" with 15 degree angle, 8", and dual 6.5" LCR. Each model features Kevlar woofers and Teteron tweeters that deliver deep low frequencies and accurate high frequencies. Designed to be used in either in-wall or in-ceiling home theater applications with both round and square magnetic grilles included with all models except the LCR and with RMS power handling up to 150-watts, the THUNDER series is perfect for any high power home theater or music application. All models are available as single units making them even more appealing to integrators and distributors for installing 5-channel, 7-channel, and even 9-channel systems.

Models Available RMS Power Frequency Response
T625CW 100-Watts 35Hz - 30kHz
T625ACW 100-Watts 35Hz - 30kHz
T825CW 125-Watts 31Hz - 30kHz
T625LCR 150-Watts 27Hz - 30kHz


"The THUNDER Series is the first new product we have released in several years for the custom installation market", said VP of Sales and Marketing Joe Trentacoste. "These new speakers were designed to meet the needs of our integrators with performance, profitability, and versatility as the three keys to their development. I am very excited to release at the CEDIA show and to show the industry how serious MTX is about the home installation market."

MTX Audio, of the MiTek Electronics and Communications Group, today introduced the MUSICA Series custom audio speakers designed for in-wall and in-ceiling distributed audio applications. The MUSICA Series is defined is designed to deliver exceptional sound quality while still delivering a value for our customers and their customers.

The MUSICA Series consists of five models, two in-ceiling, two in-wall, and a single LCR. Utilizing polypropylene woofers and PEI balanced dome tweeters, the MUSICA series is perfect for any distributed audio application. The unique press fit grille design reduces the exposed bezel to a mere 0.1", allowing the speaker to effectively blend into any environment.

Models Available RMS Power Frequency Response  
ICM612 50-Watts 43Hz - 25kHz
ICM812 65-Watts 43Hz - 24kHz
ICW620 50-Watts 40Hz - 25kHz
ICW820 65-Watts 40Hz - 24kHz
LCRM65 65-Watts 39Hz - 25kHz

"The MUSICA Series brings our entry level product under the MTX brand for the first time", said VP of Sales and Marketing Joe Trentacoste. "Our commitment to quality and value is unmatched in this category. Utilizing high quality materials and an innovative grille design we are able to deliver the performance, features, and price that our customers are looking for in distributed audio."