THUNDER1000.1 1000W RMS Mono Block Class D Amplifier

Car Amplifiers

2000-Watts Raw Peak Power

The Look, the Feel, and the Power...

MTX Thunder AmplifierFeel the Thunder

MTX THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 2000 watts peak power (1000 watts RMS) in an incredibly small package.

This wailin' amp features a high efficiency class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long.

Availability: In stock
SKU: THUNDER1000.1
$399.95
$20.00
$379.95
Share this MTX page...

Surface Mount Design

Resists vibration for reliability under the harshest conditions

Small Footprint

Easy install in any vehicle, anywhere

Variable Crossover

Tune a wide range of speakers to perfection

Extruded Heatsink

Keeps the amplifier cool without a fan

High Power High Value

The THUNDER1000.1 is a high powered subwoofer amplifier capable of delivering up to 1000 watts RMS power at 1Ω. Additionally, the unit is designed to be installed in almost any vehicle due to its small chassis size.

THUNDER 1000.1 Key Features

  • Mono block amp for subwoofer(s)
  • Small Footprint
  • Extruded Aluminum Heat Sink
  • Surface Mount PCB Design
  • Variable Crossovers

Technologically Advanced

The THUNDER1000.1 features surface mount technology. This design uses smaller more efficient parts that adhere to the circuit board much better than traditional through hole designs making it extremely vibration resistant.

WHAT OUR CUSTOMERS SAY!

Like what Thomas said this is also the best amp I have purchased in a long time. I went from a cea compliant 1200 watts rms @ 1ohm amp to this small little powerful beast and i must say this thing 1000 watts at 1 ohm beats my old 1200 watt rms amp by far and the bass quality running it at 1 ohm is truly amazing!! and it gets warm but not hot and that's normal. this amp made me want to get into system building for a hobby all over again thank you mtx!!

Charles 6/10/2013

I have been a dedicated Rockford Fosgate amp user since 1992. I recently purchased an MTX 500 watt mono block and in the words of Rapunzel, "I am never going back." MTX beats RF on price, specs, customer service and warranty. I wish I had found out about MTX years ago.

eric 8/7/2013

Wow! This amp has plenty of sharp clean pop on the bass end and clean crisp highs. This brand was recommended by a installation tech at a store that did not sell MTX. This is after a Soundstream Rubicon amp last three months and needed to be sent back twice for repairs. There is no comparison in the sound quality with the MTX high years ahead! ...Did I say 'Wow"?!

Gilbert 10/19/2013

THUNDER Amps Installed Easy Adjustment

The control panel on the THUNDER1000.1 is easy to access and make adjustments. The unit includes a variable low pass filter and a selectable bass boost, 0, +6, or +12dB. The unit also features a subsonic filter that can be used in conjunction with a vented enclosure for optimal sound quality.

Secure Connections

The THUNDER1000.1 uses set screw type connections for both its power and speaker terminals. The power and ground inputs will support up to a 1/0 AWG wire and the speaker inputs can support up to a 12 AWG wire. Set screw type connectors provide the most secure connection minimizing power loss and delivering all the power to the amplifier and to the speakers.

Remember The Amp Kit

Remember, you cannot install an amplifier without an amplifier kit. MTX recommends using a ZN5K-04 to power the THUNDER1000.1.

Features
  • Small Footprint
  • Extruded Aluminum Heat Sink
  • Selectable Bass Boost: 0, 6, or 12dB
  • Surface Mount PCB Design
  • Variable Butterworth Crossover 12dB/Oct
  • Variable Subsonic Filter
  • Thermal, DC Offset, and Short Circuit Protection Circuitry
Tech Specs
Description Mono Block
4 Ohm RMS Power Output 350W x 1 Channel
Signal to Noise Ratio 80dB
2 Ohm RMS Power Output 600W x 1 Channel
1 Ohm RMS Power Output 1000W x 1 Channel
Topology Class D
THD <1%
Frequency Response 10Hz - 220Hz
Crossover Variable Low @ 40Hz to 220Hz, 12dB/Oct
Subsonic Filter 10Hz to 50Hz, 12dB/Oct Variable
Bass Boost 0 6 12dB Switchable
Max Sensitivity 200mV
Maximum Input Signal 5V
Height 6.3"
Width 12.13"
Depth 2.25"
Support Files
Owners Manual MTX004553 THUNDER Series Owners Manual (32 pages) View |  Download
50Hzmp3 Download
Customers who bought this item also bought

MWA040 External Bass Control

MWA040 EBC for THUNDER and WET series amps

External Bass Control for use with MTX THUNDER and WET Series Amplifiers THUNDER1000.1, THUNDER500.1, WET500.1 amps

MTX External Bass Controllers

MWA034 For TA, TC, and TE Series MTX amplifiers
MWA035 For older XThunder Series MTX amplifiers 1000XD, 600XD, 300XD, TH series monoblock amplifiers 1200.1d, 650.1d, 350.1d
MWA037 For RFL and JackHammer Series amplifiers
MWA039 For TD Series amplifiers
MWA040 For THUNDER and WET series amplifiers Thunder1000.1, Thunder500.1, Wet500.1 amps
XTL-EBC For the XTL110P amplified subwoofer enclosure

See more information about External Bass Controllers at External / Remote Bass Controls.

$24.95 $19.95

35 Series 3510-04 10 inch 250W RMS 4 Ohm Subwoofer

MTX 35 Series Car Audio SubwooferHard And Loud

Implementing many of the same features found on our 75 & 95 Series SuperWoofers, the 35 Series can rock hard and loud for extended periods of time, while maintaining accurate and clean bass throughout the party. You will be impressed.

The 3510-04

The 3510-04 is a 10" single voice coil, 4 ohm, 250 watt Car Audio Subwoofer designed to deliver outstanding SPL and sound quality in an affordable combination of state-of-the-art MTX sub features...and it rocks.

Inverted Apex Surround Spider Plateau Venting Progressive Suspension

$99.95 $89.95

THUNDER75.4 400W RMS 4-Channel Class A/B Amplifier

4-Channels of Thunderous Power

MTX Thunder 75 Watt Four Channel AmplifierDesigned for Kickin' Four Channel Sound

The THUNDER 75.4 car amplifier features a class A/B design to provide the highest sound quality to any style full range speaker. Class A/B topology is designed to reproduce all notes and frequencies your full range speakers can play, ensuring you hear all of your music as your favorite artist intended.

This amplifier rocks all four speakers with room to spare, without added distortion or over-heating during long hours of loud play.

$229.95 $199.95
Free shipping