Only a Hummer could slide this monster back of the axle. See more of our fan's Jackhammer pictures on Google...
This monster SuperWoofer weighs over 400 pounds so you may need to plan for some vehicle modifcations including suspension and electrical upgrades. The JackHammer is also an engineering marvel that incorporates key technologies that make it unbelievable. The units starts with a sand cast aluminum basket and 56.25 pound magnet structure causing the unit to stand over 3 feet tall.
4000 Watts And Rocking
Internally, the unit features a 6.5" high temperature voice coil with 17 AWG aluminum wiring allowing the subwoofer to achieve 2.5" of one-way excursion, or Xmax, and the ability to handle 4000 watts RMS. An aluminum shorting and progressive roll spider reduce distortion allowing the subwoofer to play loud and clear even at high output. This unit also features a patented surround design that enables it to move more air than any other subwoofer being manufactured today.
Patented Super Surround
The carbon and glass fiber dustcap has an excellent stiffness to weight ratio increasing sensitivity so the unit is able to deliver high SPL at lower power levels. The high roll surround uses a patented design that increases Xmax and delivers the 2.5" Xmax. The unit is completed with 8 AWG set screw terminals on both voice inputs allowing large power wire to be used to ensure voltage loss is minimized and the subwoofer receives all the power you can send to it.
The TS9924-22 might seem like overkill but sometimes you just have to be heard to be seen.
All JackHammer SuperWoofers are built to order. Call us at 1-800-225-5689 to order yours today.
Patented Corner Surround Design - Allows for Unmatched One-Way Excursion
Tri-Layer Design - Carbon Fiber and Glass Fiber Dust Cap with Aluminum Honeycomb Center
Expanded Polypropylene Cone with Mica Filler for Reduced Mass and Increased Stiffness
FEA Designed Progressive Roll Spider - Features 10 AWG Integrated Tinsel Leads Woven in Allowing for 2.5" of Linear Cone Movement One Way
Aluminum Shorting Ring
6.5" Voice Coil with 17 AWG High Temperature Aluminum Wire in a Flat Wound, Long-Excursion Design Incorporating 2.5" of Xmax
Integrated Aluminum Heatsink - Maintains the Optimum Voice-Coil Temperature for Extreme Power Handling